how to increase gpm on pressure washer

A pressure washer is a device that cleans surfaces using high-pressure water. It can be used to clean dirt, grime, and stains off of a variety of surfaces, including buildings, automobiles, and concrete.

Pressure washers are also commonly used in the construction industry to clean equipment and materials. This article will explain how to boost pressure washer GPM.

What Is Pressure Washer GPM?

The unit of measurement for pressure washers is gallons per minute. This unit is used to calculate how much water a pressure washer can create in a minute.

Pressure washers with a greater GPM are more powerful.

This is an important factor to consider how to choose a pressure washer, as it will determine how quickly and easily you can complete your cleaning tasks.

If you need to clean large areas or remove tough stains, you will need a pressure washer with a high GPM. For smaller jobs or lighter cleaning, a lower GPM will suffice.

You should also consider the PSI (pounds per square inch) rating of the pressure washer, as this will determine its overall power.

To sum it up, GPM is a measure of how much water a pressure washer can output in a minute, and is an important factor to consider when choosing the right model for your needs.

How Many GPM Does A Pressure Washer Need?

How many GPM does a pressure washer need is a question many people have when they are looking to purchase a pressure washer. What you’ll use the pressure washer for will determine the answer.

For information have a look at how much pressure washer psi I need, to check you have the right pressure for the job you want to do.

You’ll need a higher GPM rating if you’re intending to use the pressure washer for heavier chores like removing paint or washing concrete.

Pressure washers with a higher GPM rating can output more water in a shorter amount of time, which is what you need for tougher jobs. Check this out for the best commercial pressure washer available.

To give you an idea of how many GPM a pressure washer needs, here are some common pressure washer applications along with the recommended GPM rating:

  • Washing your car: 3-5 GPM
  • Power washing your deck: 5-8 GPM
  • Stripping paint: 8-10 GPM
  • Cleaning concrete: 10+ GPM

So, how many GPM does a pressure washer need? As you can see, the amount of GPM needed really depends on what you will be using the pressure washer for.

If you are only going to be using it for light-duty tasks, then you can get by with a lower GPM rating. However, if you are going to be using it for tougher jobs, then you will need a higher GPM rating.

When choosing a pressure washer, make sure to choose one that has the right GPM rating for the tasks you will be using it for.

Can You Increase GPM On A Pressure Washer Safely?

How to increase GPM on pressure washers and can you do it safely? Yes, you can increase the GPM on a pressure washer safely by following these steps:

  1. Choose the correct nozzle for the job.
  2. Adjust the pressure regulator to the correct setting.
  3. Do not exceed the machine’s maximum PSI rating.
  4. Use only high-quality detergents and cleaners.
  5. Follow all manufacturer’s safety recommendations.

A pressure washer’s GPM can be increased to help speed up the cleaning operation.

However, it is important to follow the steps above to ensure that you do not damage your machine or injure yourself. This article explains more about pressure water safety.

How To Increase GPM On A Pressure Washer

What can you do to boost your pressure washer’s GPM output.

By following these tips, you can get more water flowing through your machine, making it more powerful and efficient.

Check the Pump

Because the pump is in charge of pushing water through the pressure washer, it must be in good functioning order. If the pump is damaged or not properly maintained, it can cause a decrease in GPM output.

Adjust the Nozzle

The type of nozzle you’re using can also affect the GPM output of your pressure washer. A nozzle with a smaller opening will restrict the flow of water, resulting in lower GPM.

Conversely, a nozzle with a larger opening will allow more water to flow through, increasing GPM.

Increase the Water Pressure

Another way to increase GPM is to turn up the water pressure. This can be done by adjusting the pressure valve on your pressure washer. Be sure not to increase the pressure too much, as this could damage the machine.

Use a Different Hose

If you’re still not getting the desired GPM output, try using a different hose. A hose with a larger diameter will allow more water to flow through, while a smaller diameter hose will restrict the flow.

Clean the Filters

Finally, make sure that the filters on your pressure washer are clean. If they’re clogged, it can restrict the flow of water and decrease GPM.

By keeping the filters clean, you can ensure that your pressure washer is running at its best.

Other Tips To Increase Pressure Washer Cleaning Power

Looking for other ways to increase your pressure washer’s cleaning power besides upping the GPM? Here are a few tips that will have you cleaning like the pros.

Add A Detergent Into The Mix

One way to increase the cleaning power of your pressure washer is to add a detergent into the mix.

This will help to break down any tough dirt and grime that may be stuck to the surface you’re trying to clean. Learn how to use soap with your pressure washer in this article.

Be sure to follow the directions on the detergent packaging, as using too much can actually damage your pressure washer. Rinse First, Then Wash

If you’re dealing with a really dirty surface, it can be helpful to rinse it off first with just water before adding in any detergent. This will aid in the removal of any loose material that may clog the pump on your pressure washer.

Once you’ve rinsed the area, you can then add pressure washer detergent and proceed with the washing as usual.

Learn More Advanced Pressure Washing Techniques

If you’re looking to take your pressure washing skills to the next level, there are a few things you can do to increase your cleaning power.

Using the higher pressure setting on your machine is one of the most efficient ways to accomplish this. This will help to loosen any tough dirt and grime that may be clinging to surfaces.

Another way to increase your pressure washer’s cleaning power is by using hotter water.

Just be careful not to use too much hot water, as this might cause harm to the surfaces.

Finally, you can also add attachments to your pressure washer hose in order to reach tight spaces or areas that are difficult to access with the machine alone.

These attachments can help to make cleaning quicker and easier, and can really help to maximize your machine’s potential.

Use A Hot Water Pressure Washer

The hot water pressure washer is extremely adaptable, and it may be used for a wide range of cleaning tasks.

The most common use for a hot water pressure washer is to clean cars, trucks, and other vehicles. Cleaning roads, sidewalks, decks, and patios with hot water pressure washers are also very frequent.

Dirt, filth, and stains are easily removed from surfaces using a hot water pressure washer. The hot water loosens the dirt and grime, making it easier to remove with the pressure washer.

Hot water pressure washers are also great for removing tough stains, such as grease stains or paint stains.

An industrial hot water pressure washer is more effective and efficient than an industrial cold water pressure washer.

Upgrade Your Unit – Nothing Cleans Like A Hotsy!

Adding a Hotsy pump to your pressure washer can increase its cleaning power by up to 80%. Whether you need more pressure for tough jobs or higher flow rates to clean large areas quickly, Hotsy has a pump that will fit your needs.

Hotsy Commercial Pressure Washers are the best in the business – and once you use one, you’ll see why. They’re really powerful and efficient.

Pumps from Hotsy are made to last and are simple to maintain. They can survive the demands of commercial use day after day because of their high-quality build.

And if something does go wrong, Hotsy’s nationwide network of factory-trained dealers is there to help get you back up and running quickly.

You can’t beat a Hotsy when it comes to cleaning power!

Final Thoughts On How To Increase GPM On A Pressure Washer

Now that you know the basics of how to increase GPM on a pressure washer, it’s time to put what you’ve learned into practice.

Contact the staff today to learn more about how to improve GPM on pressure washers.

Whether you want to buy a new unit or check out our pressure washer rental service, we’ve got it all and then some!